6
F
A
I
H
H
I
36.5
13,5
46
69
H
H
I
I
Installation
Fig. 9
Unpacking
Check that the cooker hood is not damaged. Transportation
damages should immediately be reported to the transport
company. Damages, faults and eventually missing parts
should immediately be reported to the retailer. Dispose
carefully of the packaging material so that it is out of the
way of small children.
Position
The cooker hood should be mounted freely hanging on the
wall. The cooker hood must be at least 60 cm above electric
burners or electric range, or at least 70 cm above gas burners
or gas range. Fig. 9.
Electrical connection
The electric outlet should be placed inside the chimney.
The hood has a power cord and moulded plug with earth
connection for a wall outlet of 230V.
Mounting of hood on wall - Fig. 10
•
Fix the drilling template to the wall.
•
Make 3 Ø 8 mm holes in the wall. 2 at points H, 1 as
desired at points I.
•
Insert the three Ø 8 mm expansion plugs into the wall.
•
Insert 2 5x45 screws at points H but do not tighten them
completely.
•
Open the grid.
•
Fit the hood into holes H, tighten the 2 screws.
•
From inside the hood, insert the third 5x45 screw into
hole I.
Mounting under cupboard - Fig. 11
•
Make the holes on the bottom of the cupboard, using the
drilling template.
•
From inside the cupboard, insert the 4 supplied screws
and tighten them in the appropriate holes on the
appliance.
Extraction
•
Connect the air outlet to the smoke exhaust hose
•
Open the suction grid (Fig. 6).
•
Remove the carbon filters: remove by rotating both
filters anticlockwise (Fig. 7).
•
Check that the selection lever for extraction/
recirculation is in the position A. (Fig. 12).
•
Refit the suction grid.
Min
70 cm
Min
60 cm
Fig. 10
Fig. 11
Fig. 12
Selector
Extraction (A)
Recirculation (F)
1
2
3
4
1
2
3
4
195
63.5
36,5
119
85
=
=
Summary of Contents for EFT 800
Page 1: ...User Manual Istruzioni di montaggio e d uso EFT 800 UK I ...
Page 8: ...15 ...
Page 9: ...LI1RSB ...
