Electrolux EFT 800, User Manual

Page: 5 / 9

5
Fig. 8
Changing the carbon filter
Only applicable for recirculation. The carbon filters absorb
smells and odours. The carbon filters cannot be washed and
should be replaced at least every 4 months or more
frequently if the hood is used consistently. Remove the
filter by (Fig. 7):
•
Remove the suction grid (Fig. 6).
• Turn the exhausted carbon filters anticlockwise to ulock
from their place .
• Remove the carbon filters.
Replace in reverse order. Note! Always ensure to replace
both filters at the same time.
Attention
Failure to observe the rules for cleaning the appliance and
changing and cleaning the filters may cause fires. Therefore,
we recommend observing these instructions.
Cleaning
To clean the outside of the hood use a cloth moistened with
denatured alcohol or neutral liquid detergents. Never use
products containing abrasives.
Changing the light
Disconnect the cooker hood from the main supply before
changing the light. Change the light by (Fig. 8):
•
Remove the suction grid (Fig. 6).
• Replace the damaged part with one of equal rating.
If the hood does not function
Before calling for service
Check the plug is correctly connected to the wall socket.
Check the fuse. Do not attempt any repairs yourself that
are likely to lead to further damage. If the problem
remains, contact your dealer or an approved service
company. Remember to save your purchase receipt and
warranty card (only used in some countries).
Service and spare parts
Your dealer or service company will supply you with
service and spare parts. Be sure you have the product
number and model name at hand when ordering service
or parts.
Technical data
Model EFT 800
Size Height 152 mm
Width 800 mm
Depth 524 mm
Light Max 2x40 W
Grease filter 1 pcs.
Voltage 220-240 V
Total power 320 W
Fig. 7