Electrolux EFP/W-1100ULS EEC, User Manual

Page: 9 / 104

9
• Press the key. The minute digit starts
blinking.
• Press the + or – key to set the minute.
• Press the key to set the off time. The
hour digit starts blinking.
• Press the + or – key to set the hour.
• Press the key. The minute digit starts
blinking.
• Press the + or – key to set the minute.
• Press the key. The temperature digit
starts blinking.
• Press the + or – key to set the temperature.
• Press the key to continue with the
timer setting or press the key to
confirm the setting.
Viewing the timer setting
• Press the key.
• Press the + or – key to check the power-on
time of the set timers one by one.
• To check the power-off time, press the ▲
key.
• Press the + or – key to check the power-off
time of the set timers one by one.
To delete selected setting, press the C key.
Activation timer
Press the key to activate the timer
function.
Note:
When the timer is active, the heating level
must be manually selected. If the heater
function is not selected only the flame
effect goes on at the set power-on time.
Open window detection
• Press the key to activate open
window detection function. The
icon appears on the display.
• The icon on the display starts
blinking and the heater stops heating if
room temperature drops quickly. Press
the key again to cancel open
window detection.
Note:
Open window detection does not work if
you have not turned heating on.
Note:
Make sure to match the polarity of the
batteries with the markings inside the
battery compartment.
ENGLISH