8
Fig. 6
Front cover
Charcoal filter
The charcoal filter should only be used if you
want to use the hood in the recirculation
function.
To do this you will need an original charcoal
filter (available from your local Service Force
Centre).
Replacing the charcoal filter
The charcoal filter cannot be washed nor
regenerated.
The charcoal filter should be replaced every 4
months under normal use.
Replacement filters are available from your
local Service Force Centre.
Fitting - Fig. 6
1.
Open the front door to access the motor
housing.
Attention! The front door must always be
accessible and dismountable to allow access to
the motor housing.
In exceptional cases the carbon filter/s can be
installed from below, extracting the drawer and
removing the fat filters, but it is, in any case, a
more difficult operation.
2.
Apply the carbon filter/s to cover the grill that
protect/s the motor/s.
3.
Turn clockwise until blocking.
4.
Remount the front door (or the fat filters).
To remove
proceed in the reverse order.
Clean the inner housing using a hand hot
solution only(never use caustic detergents,
abrasive powders or brushes).
Always specify the hood model code number
and serial number when ordering replacement
filters. This information is shown on the
registration plate located on the inside of the
unit.
The charcoal filter can be ordered from your
local Service Force Centre.