Electrolux EFMC417SIW0, Use & Care Manual

Page: 12 / 23

12
Operating Instructions
To change the temperature, press the temp but-
ton to scroll to the desired setting.
To protect your fabrics, not all temperatures are
available with every cycle. If a temperature is not
appropriate for the cycle, it cannot be selected
and will not be lit by pressing the
temp button.
With exception of sanitize , the temperature select-
ed for the cycle will be remembered and recalled
each time that cycle is selected in the future.
Follow the fabric care label instruc-
tions on items to be dried.
For best results
sanitize (on select models)
Recommended for durable fabrics and towels.
Use this selection to remove harmful bacteria
from your clothing or other items where sanitiza-
tion is desired.
This option will kill 99.9% of bacteria. A higher
temperatures is required to kill bacteria. Please
check fabric care labels to prevent damage.
high
Recommended for most cotton fabrics.
normal
Recommended for wrinkle free, easy care, light-
weight fabrics and bulky loads.
low
Recommended for delicate fabrics.
air dry
This setting (no heat) should only be used with a
time dry cycle to dry items containing feathers,
down, foam rubber, plastics or rubber-like ma-
terials; to refresh clothing, stuff ed animal, pillows
or blankets; and to dust draperies.
The appropriate dryness level will automatically
be indicated when an auto dry cycle is selected.
To change the preset level, press the
dry level
button to scroll to the degree of dryness desired.
To protect your fabrics, not all dryness levels
are available with every cycle. If a dryness level
is not appropriate for the cycle, it cannot be
selected and will not be lit by pressing the
dry
level button.
The dryness level selected for the cycle will be
remembered and recalled each time that cycle
is selected in the future.
Select the normal dryness level for most Auto
Dry cycles.
Occasionally a load may seem too damp or
over-dried at the end of the cycle. To increase
drying time for similar loads in the future, se-
lect
high or max (on select models). For loads
requiring less drying time, select less .
Select damp for items you wish to partially dry
before hanging or ironing.
Cycle Settings
Drying Temperature Dryness Level (Auto Dry)
NOTE
To change the temperature once the cycle has
begun, press the
pause button, make the new
selection and press start again.
NOTE
To change the dryness level once the cycle
has begun, press the
pause button, make the
new selection and press start again.