9 electrolux
Installation
EN
Hood body installation
• Before attaching the hood body, tight
-
en the two screws
Vr
located on the
hood body mounting points.
• Hook the hood body onto the screws
12a
.
• Fully tighten support screws
12a
.
• Adjust screws
Vr
to level the hood
body
Connection in Ducting Version
When installing the ducting version, con-
nect the hood to the chimney using either
a flexible or rigid pipe ø 150 or 120 mm,
the choice of which is left to the installer.
To install a ø 150 pipe
• Fix the pipe in position using sufficient
pipe clamps (not supplied).
To install a ø 120 pipe
• To install a ø 120 mm air exhaust con
-
nection, insert the reducer flange 9 on
the hood body outlet.
• Fix the pipe in position using sufficient
pipe clamps (not supplied).
• Remove any activated charcoal filters.
Connection in Recycling Version
• Insert the connection extension pieces
laterally
14.1
in connec-tion
15
.
• Insert the Connector
15
into the
Support bracket
7.3
and fix it with a
screw.
• Make sure that the outlet of the exten
-
sion pieces
14.1
is hori-zontally and
vertically aligned with the chimney out-
lets.
• Connect the air outlet connection
15
to the hood body outlet using either
a flexible or rigid pipe ø 150 mm, the
choice of which is left to the installer.
• Ensure that the activated charcoal fil
-
ters have been inserted.
���
��
�����
��
����
���
�����
�
�����
