Electrolux EFC 60652, User Manual

Page: 19 / 24

electrolux electrolux
electrolux electrolux electrolux installation
19 19
19 19 19
GB
• ••
•• Carry out the connection of an exhaust pipe (pipe and strips for fitting are not
supplied, and should be purchased separately) for discharge of vapors and
fumes to the connection ring situated on the suction motor unit (15)
(15)
(15) (15) (15). It is
recommended to use a flexible pipe/tube at least for the first section of the pipe.
Where it is required to use the cooker hood in the filter version then fix the
support bracket “G”
“G”
“G” “G” “G” to the deflector “F”
“F”
“F” “F” “F” using 2 screws.
• ••
•• Install the telescopic chimney flue above the cooker hood (16)
(16)
(16) (16) (16):
for extraction mode: for extraction mode: for extraction mode: for extraction mode: for extraction mode: insert the flexible exhaust pipe from the inside and connect
it to a vapor exhaust device for external exhaust:
for r
for r for r for r for recir ecir ecir ecir ecirculation mode: culation mode: culation mode: culation mode: culation mode: check the correct fit of the cooker hood connection ring
“B” “B” “B” “B” “B” to the deflector “F”. “F”. “F”. “F”. “F”.
• •• •• Fix the telescopic chimney (17a 17a 17a 17a 17a) on top of the chimney support “L” “L” “L” “L” “L” (17b 17b 17b 17b 17b) using
2 screws.
• ••
•• Fix the front panel, hook the front panel firstly from the top (18a)
(18a)
(18a) (18a)
(18a) then from the
bottom via the tabs (18b) (18b)
(18b) (18b)
(18b).
• •• •• Fix the front panel into place using 2 screws (19) (19) (19) (19) (19).
Mount the grease filter.
Connect the hood to the mains electricity and check, finally, that it is functioning
well.
15
16
16
15
17a
17b
17a
17b
18a
18a
18b
19
19