5
www.electrolux.com
CNT
EN
• The appliance and its accessories become hot during operation. Use only designated handles and
knobs. Allow to cool down before cleaning and maintenance.
• Caution: The surfaces around the heater are subjected to residual heat after use.
• The appliance must be switched off and mains plug removed from wall socket each time after use, and
before cleaning and maintenance.
• Do not let the power cord come into contact with hot surfaces or hang over the edge of a table or
counter.
• The kettle can only be used with the base unit provided.
• This appliance is not intended to be operated by means of an external timer or separate remote
control system.
• This appliance is for indoor use only.
• This appliance is intended for domestic use only. Electrolux will not accept any liability for possible
damage caused by improper or incorrect use.
GETTING STARTED
1.
Before first use,
wipe the inside and outside of the kettle with a damp cloth.
2.
Place the base unit on a firm and flat surface.
Plug the mains plug into a wall socket. Extra cord length
can be wound up at the bottom of base unit.
3. Press the opening lid button to open the lid, pour water into the kettle. Make sure water level is visible
in the water level indicator, but not exceeding the Max. mark. Fill at least 0.6 L to ensure that the
temperature shown on the display is reliable.
4.
Close the lid and make sure it snaps in correctly.
Place the kettle onto the base. The kettle beeps
to indicate that it is ready for use. The display shows the water temperature. Press the START/KEEP
WARM button once to start boiling water. When the water boils, the kettle beeps 1 time and switches off
automatically.
5. START/KEEP WARM button and LED light. The left LED light on the START/KEEP WARM button indicates
boiling is in progress, the right LED light indicates KEEP WARM function is active.
6.
To heat water to selected temperature (not boiling):
Press the buttons
or
to select temperature.
Press the START/KEEP WARM button once. When the selected temperature is reached, the kettle beeps
1 time and switches off automatically.
7.
To heat water and keep it warm at selected temperature: Press the buttons
or
to select
temperature. Press the START/KEEP WARM button twice. (The left LED light on the START/KEEP WARM
button indicates boiling is in progress, the right LED light indicates KEEP WARM function is active). When
the selected temperature is reached, the kettle beeps 1 time and keeps the water warm for 30 minutes.
8.
The automatic switch off function.
When the water has boiled
or
the kettle is moved from the base, it
will switch off automatically.
9. If you wish to stop the heating process before the water is boiling, simply press the START/KEEP WARM
button twice.
