Electrolux EEC67300L User Manual Download Page 23

Page: 23 / 28

Problem and alarm code Possible cause and solution
You cannot activate the

appliance.

• Make sure that the mains plug is connected to the

mains socket.

• Make sure that there is no damaged fuse in the fuse

box.

The programme does not

start.

• Make sure that the appliance door is closed.

• If the delay start is set, cancel the setting or wait for

the end of the countdown.

• The appliance recharges the resin inside the water

softener. The duration of the procedure is approxi‐

mately 5 minutes.

The appliance does not fill

with water.
The display shows

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is

not too low. For this information, contact your local

water authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is not clog‐

ged.

• Make sure that the inlet hose has no kinks or bends.

The appliance does not

drain the water.
The display shows

• Make sure that the sink spigot is not clogged.

• Make sure that the filter in the outlet hose is not clog‐

ged.

• Make sure that the interior filter system is not clog‐

ged.

• Make sure that the drain hose has no kinks or bends.

The anti-flood device is on.
The display shows

• Close the water tap and contact an Authorised Serv‐

ice Centre.

The appliance stops and

starts more times during

operation.

• It is normal. It provides optimal cleaning results and

energy savings.

The programme lasts too

long.

• If the delay start option is set, cancel the delay set‐

ting or wait for the end of the countdown.

• Activating options can increase the programme dura‐

tion.

The remaining time in the

display increases and

skips nearly to the end of

the programme duration.

• This is not a defect. The appliance is working cor‐

rectly.

Small leak from the appli‐

ance door.

• The appliance is not levelled. Loosen or tighten the

adjustable feet (if applicable).

• The appliance door is not centred on the tub. Adjust

the rear foot (if applicable).

The appliance door is diffi‐

cult to close.

• The appliance is not levelled. Loosen or tighten the

adjustable feet (if applicable).

• Parts of the tableware are protruding from the bas‐

kets.

ENGLISH

Summary of Contents for EEC67300L





























Search results

Summary of Contents for EEC67300L

Reviews:

Related manuals for EEC67300L

Brands by name

Popular brands

Electrolux EEC67300L, User Manual

Search results

Summary of Contents for EEC67300L

Reviews:

Related manuals for EEC67300L

Brands by name

Popular brands