Electrolux EDH3284PDW, User Manual, Page: 9 / 20

6. SETTINGS
A
D
B
C
E
A)
Time touchpad
B)
Delay touchpad
C)
Buzzer touchpad
D)
Anti-crease touchpad
E)
Start/Pause touchpad
6.1 Child lock function
This option prevents children to play with
the appliance while a programme oper-
ates. The programme knob and the
touchpads are locked. Only
OFF
switch is unlocked.
Activating the child lock option
1.
Use the programme knob to set any
programme.
2. Press and hold touchpads ( A ) and ( D )
at the same time until the child lock in-
dicator comes on.
• It is possible to deactivate the child
lock option while a programme op-
erates. Press and hold the same
touchpads until the child lock indi-
cator goes off.
6.2 Water hardness and
conductivity
Water hardness is different for different lo-
cations. Water hardness has an effect on
the water conductivity and on the con-
ductivity sensor of the appliance. If you
know, the value of the water conductivity
you can adjust the sensor in order to have
better drying results.
Adjusting the conductivity sensor
1.
Use the programme knob to set any
programme.
2. Press and hold touchpads ( A ) and ( B )
at the same time until one of the these
indicators comes on:
•
(low <300 μ S/cm)
•
(moderate 300-600 μ S/cm)
•
(high >600 μ S/cm)
3. Press the touchpad ( E ) again and
again until the indicator of the correct
level comes on.
4. To confirm the adjustment, press and
hold touchpads (
A ) and ( B ) at the
same time for approximately 2 sec-
onds.
7. DAILY USE
Before you use the appliance for
the first time do one of these op-
erations:
• Clean the tumble dryer drum
with a moist cloth.
• Start a short programme (e.g.
30 minutes) with moist laundry.
At the beginning of drying cycle
(3-5 min.) there could be a slightly
higher sound level. It is because of
start of the compressor that is
normal for compressor powered
appliances such: refrigerators,
freezers .
7.1 Starting a programme
without delay start
1. Prepare the laundry and load the ap-
pliance.
2. Set the correct programme and op-
tions for the type of load.
• The display shows the programme
duration.
3.
Press the Start/Pause touchpad, the
programme starts.
ENGLISH 9