background image

15.

22

2

1

1

16.

1) 

If necessary, one time for each 6 months, remove the fluff from the heat exchanger

compartment. You can use a vacuum cleaner.

9.4 

Cleaning the drum

Clean the drum with a moist cloth. Only
use neutral detergents. Do not use abra-
sive products, abrasive cleaning pads or
solvents.
Dry the drum with a soft cloth.

9.5 

External Cleaning

Clean the appliance with a moist cloth.
Only use neutral detergents. Do not use

abrasive products, abrasive cleaning pads
or solvents.
Dry the appliance with a soft cloth.

9.6 

Cleaning the airflow slots

Use a vacuum cleaner to remove the fluff
from the airflow slots.

10. 

TROUBLESHOOTING

10.1

Problem

Possible solution

You cannot activate the appliance.

Make sure that the mains plug is connec-
ted to the mains socket.

 

Make sure that there is not a damaged
fuse in the fuse box.

The programme does not start.

Press Start/Pause.

 

Make sure that the appliance door is
closed.

The appliance door does not close.

Make sure that the installation of the filter is
correct.

 

Make sure that the laundry does not catch
between the appliance door and the rub-
ber seal.

The appliance stops during opera-
tion.

Make sure that the water container is emp-
ty. Press Start/Pause to start the pro-
gramme again.

The display shows a long pro-
gramme duration.

1)

Make sure that the weight of the laundry is
applicable to the duration of the pro-
gramme.

14 www.electrolux.com

Summary of Contents for EDH3284PDW





















Reviews: