background image

5

Instructions for use

1

Safety 

Before first starting up

Note the 

”Installation and connection instruc-

tions”

Before first starting up, check the machine for any
damage incurred during transport. Never connect
up a damaged machine. If parts are damaged,
contact your supplier.

Intended use

The dryer is intended for drying standard laundry in
domestic applications. 

Conversions or modifications to the dryer are not
permitted.

The laundry must not contain flammable solvents
(benzene, alcohol, stain remover, etc.) . Risk of fire

and/or explosion! Laundry which has come into

contact with such substances must be rinsed thor-
oughly by hand before drying.

When using dry-cleaning sets: Only use those
products which are declared as suitable for the
dryer by the manufacturer.

Do not place items of laundry in the dryer which
contain foam rubber or materials similar to rubber.
Risk of fire!

Do not place heavily worn laundry items in the dry-
er. Risk of fire!

Do not place laundry items with loose fillings (e.g.
cushions) in the dryer. Risk of fire!

Parts with rigid components (e.g. door mats) may
cover the air slots. Risk of fire! Do not place such
items in the dryer.

Do not overfill the dryer. Risk of fire! Observe max.
loading volume of 6 kg.

Ensure that explosive objects (e.g. cigarette light-
ers, spray cans, etc.) do not enter the dryer with
the laundry. Risk of fire and/or  explosion!

Risk of fire: items that have been spotted or
soaked with vegetable or  cooking oil constitute a
fire hazard and should not be placed in the tumble
dryer.

If you have washed your laundry with stain remover
you must execute an extra rinse cycle before load-
ing your tumble dryer.

Clean the micro-fine filter and fine strainer after
each drying cycle.

Do not use the machine if there are no lint filters or
if these are damaged. Risk of fire!

Clean the heat exchanger regularly.

With stacked washer and dryer: Do not place ob-
jects on the dryer. These may fall off during opera-
tion.

The covering bonnet of the bulb for the drum light
must be screwed down tightly.

Child safety

Keep packaging away from children. Risk of suffo-
cation!

Children can often not see the dangers associated
with electric machines. Never leave unsupervised
children near the dryer.

Ensure that children and small animals cannot
climb into the dryer’s drum. Risk of death! Keep
the dryer door shut whenever it is not being used.

General safety

Only specialists may undertake repairs on the dry-
er. 

Never start up the dryer if the mains cable is dam-
aged or if the operating screen, operating plate or
base area are damaged so that the inside of the
machine is open and accessible.

Switch off the dryer before all cleaning, care or
maintenance work. Also disconnect the mains plug
from the socket or – with permanent connections –
switch off the LS switch in the fuse box and/or fully
unscrew the screwed-in fuse.

Disconnect the machine from the power supply
during long pauses in operations.

When removing from the socket, never pull the
mains plug by the cable, instead take a hold of the
plug.

Manifold plugs, couplings and extension cables
must not be used. Risk of fire from overheating!

 

Do not spray down the dryer with jets of water.
Risk of electric shock!

Do not lean on the open door. The machine may tip
over.

Once the drying cycle has been interrupted, the
laundry and drum may be hot. Risk of burns! Take
care when  removing  the  laundry.

Summary of Contents for EDC 5470

































Reviews: