55
ENGLISH
12 Mains-on light
This light lights up by selecting the programme or
time and goes out by turning the selector dial to
“0” or by opening the door.
10 “End of programme” light
This light flashes (alternatively to
light) at the
end of the programme (after the cooling phase)
and continues to flash during the anti-crease
phase to remind you that filter needs cleaning
and water container must be emptied. It goes out
when you open the door or turn the programme
selector dial to “0”.
11 Programme and time selector
dial
It allows you to select an automatic drying
(graduation in letters) or a time controlled
drying (graduation in minutes).
Automatic drying (electronic
programmes)
The appliance operates in these programmes by
means of dampness sensors. All you have to do
is to set the selector dial to the programme
required (A, B, C or D), according to the type of
laundry and the degree of drying required (see
programme table).
Time controlled drying
You can select a time up to 90 mins. to finish off
drying, if necessary, or to use your tumble dryer
independently of the electronic control system.
When selecting a short drying time, remember
that during the last 9 mins. of operation, the heat
is cut off in order to carry out a cooling phase.
To cancel a programme in operation, turn the
selector dial to “0”.
When drying is completed, switch off the
appliance by turning the dial to “0” before
opening the door.
