background image

(Fig.11)

tape

Fig.11

8

the

(Fig.12)

9.

Fig.12

Glass

Glass should be cleaned every week in order to keep 

the shiny

Grease filter

Note: To replace the filter, please let the hood on 
suction mode before cutting off the electrical supplier 
and don't open the glass panel by hand.



The grease filter should be cleaned frequently ( 

every two months of operation, or more frequently for 
heavy use). Use a warm detergent solution.

Grease filter is washable
Lift the glass to the height where the poles hold it. 
Remove the grease filter by pulling out each latch

while the glass is open. This will disengage the filter
from the hood. Tilt the filter downward and remove. 

Wash the filters, taking care not to bend them. 

Allow them to be dry before refitting

When refitting the filters, make sure that the handle

 is visible from the outside.

To install the grease filter, align rear filter tabs with

 slots in the hood. Pull out the latch, push filter into
 position and release. Make sure the filter is securely
 engaged after assembly. 

Push the glass to the original position.

Replacing the lamp

Replace the damaged LED, only use LED DC 12V,2X2W 
Max

Note: 

WARNING: .
1. Always switch off the electrical supply before carrying 
out any operation on the appliance.
2. Only a qualified and trained service technician can 
undertake the work of bulbs replacement and servicing.

We recommend only using lamps of the same 

specification as the ones being replaced.

9

Changing the lamp

Summary of Contents for ECS9081G








Reviews: