8
• Failure to insure complete closure of doors or drawers, through
forgetfulness or carelessness.
• Place the product in the compartments so as to block proper air
circulation or hinder the perfect closing of doors / drawers.
• Exceed product weight allowed for each shelf / drawer.
The previously described actions are prohibited!
Residual risks
• The machine has several risks that were not completely eliminated
from a design standpoint or with the installation of adequate protection
devices. Nevertheless, through this manual the Manufacturer has
taken steps to inform operators of such risks, carefully indicating the
personal protection equipment to be used by them. Sufficient spaces
are provided for during the machine installation stages in order to limit
these risks.
To preserve these conditions, the areas around the machine must
always be:
– kept free of obstacles (e.g. ladders, tools, containers, boxes, etc.);
– clean and dry;
– well lit.
For the Customer's complete information, the residual risks remaining
on the machine are indicated below: such actions are deemed
improper and therefore strictly forbidden.
R
Re
essiid
du
ua
all rriisskk
D
De
essccrriip
pttiio
on
n o
off h
ha
azza
arrd
do
ou
uss ssiittu
ua
attiio
on
n
Slipping or falling
The operator can slip due to water or dirt
on the floor
Burns/abrasions (e.g.
heating elements, cold
pan, cooling circuit plates
and pipes)
The operator deliberately or
unintentionally touches some
components inside the machine without
using protective gloves
Electrocution
Contact with live parts during
maintenance operations carried out with
the electrical panel powered
Falling from above
The operator intervenes on the machine
using unsuitable systems to access the
upper part (e.g. rung ladders, or climbs
on it)
