g
134
0
Before starting the descaling pro-
gramme, clean the brewing unit (see
„Cleaning the brewing unit“ page 132).
0
Press the "MENU" button (Figure5). The
menu option «
CHOOSE LAN-
GUAGE
» appears.
0
Press the scrolling buttons "<" or ">"
(Figure 6) until the menu option
«
DESCALE
» appears.
0
Confirm the menu option with the
"OK" button (Figure 6). The display
shows «
DESCALE NO
».
0
Press thescrolling button "<", and the
display shows «
DESCALE YES
».
0
Confirm with the "OK" button
(Figure 6). The descaling programme
starts.
3
If "OK" is not pressed, the appliance
automatically returns to the coffee
mode after about 120 seconds and the
descaling programme is not started.
The top line of the display alternates
between «
ADD DESCALER
» and
«
PRESS MENU KEY
» whilst the
bottom of the display shows a progress
bar and percentage,
«
0%
».
0
Empty the water tank, fill it with at
least 1 litre of water and add the des-
caling agent.
1
Warning: Make sure that any splashes
from the descaling agent do not come
into contact with surfaces that are
sensitive to acids, such as marble, lime-
stone and ceramic.
0
Insert the hot water nozzle (Figure 10).
0
Put a container with a capacity of at
least 1.5 litres underneath the hot
water nozzle.
0
Press the "MENU" button (Figure 5).
The descaling programmestarts and the
descaling liquid runs out of the hot
water nozzle. The display shows
«
DESCALING
» and a progress bar
shown with a percentage, e.g.
«
25%
».
The descaling programme automati-
cally goes through a series of rinses
and pauses to remove limescale depos-
its from the inside of the coffee
machine.
After about 45 minutes the water tank
is empty and the top line of the display
alternates between «
DESCALE
COMPLETE
» and «
PRESS MENU
KEY
» whilst the bottom line shows a
progress bar and a percentage
«
50%
».
0
Press the "MENU" button (Figure 5).
The appliance is now ready for a rins-
ing process with clean water. The top
line of the display alternates between
«
RINSING
» and «
FILL TANK !
»
whilst the bottom of the display shows
a progress bar and percentage
«
50%
».
0
Take out the water tank, fill it with
clean water and put it back in place.
The top line of the display alternates
between «
RINSING
» and «
PRESS
MENU KEY
» whilst the bottom of the
display shows a progress bar and per-
centage
«
50%
».
0
Empty the container under the hot
water nozzle and put it back under the
hot water nozzle.
0
Press the "MENU" button (Figure 5).
A rinsing process takes place with clean
water and the rinsing water runs out
of the hot water nozzle. The display
shows «
RINSING
» and a progress
bar shown with a percentage, e.g.
«
55%
».
After a few minutes the water tank is
empty and the top line of the display
alternates between «
RINSING
COMPLETE
» and «
PRESS MENU
KEY
» whilst the bottom line shows a
progress bar and a percentage
«
90%
».
0
Press the "MENU" button (Figure 5).
For a short time the top line of the dis-
play alternates between «
RINSING
COMPLETE
» and «
FILL TANK !
»
whilst the bottom line of the display
822_949_354 ECG6600-East_Elux.book Seite 134 Freitag, 1. Februar 2008 11:36 23
