Steam generation system
Caution!
Dry the steam generator after
each use. Soak up water with the
Quick sponge.
Remove a lime residue with water and
vinegar.
Caution!
Chemical de-scaling agents
can damage the oven enamel. Obey
instructions of the manufacturer!
Water drawer and steam generator
1. Fill the water and vinegar mixture (ap-
proximately 250 ml) through the water
drawer in the steam generator.
Let to operate for approximately 10 mi-
nutes.
2. Remove the water and vinegar with a
soft sponge.
3. Use clean water (100-200 ml) to flush
the steam generation system through
the water drawer.
4. Remove water from the steam genera-
tor with the sponge and rub dry.
5. Keep the door open to let the oven dry
fully.
Shelf support rails
You can remove the shelf support rails to
clean the side walls.
Removing the shelf support rails
1. Carefully pull the rail up and out of the
front catch.
2. Lightly move the rail on the front catch in-
wards.
3. Pull the rail out of the rear catch.
Installing the shelf support rails
Install the shelf support rails in the opposite
sequence.
Oven lamp
Warning!
There is a danger of
electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or
switch off the circuit breaker.
Put a cloth on the bottom of the oven
for protection of the oven light and
glass cover.
Replacing the rear oven light bulb/cleaning
the glass cover
1. Turn the glass cover anti-clockwise to re-
move it.
2. Remove seals and metal ring, and clean
the glass cover.
20
electrolux