Component Teardown and Testing
4-12
Figure 4-25. Control Box Removal
P.C.B Assembly Removal
1. Pull the lever end of the plastic fastener and remove
the Flexible Printed Circuit (FPC) of membrane panel.
(See Figure 4-26)
2. Remove screws securing the control circuit board.
3. Lift up the control circuit board from the assembly
control box.
4. When reconnecting the FPC connector, make sure
that the holes on the connector are properly engaged
with the hooks on the Plastic Fastener.
Removal of Control Panel Sub.
1. Remove Metal bracket from Control Panel Sub.
(See Figure 4-27 and 4-28)
2. Replace with a new one.
Control Box Removal
1. Disconnect power and remove grille.
2. Remove a screw securing the control box assembly.
3. Be sure to ground any static electric charge in your
body and never touch the control circuit.
4. Disconnect the connectors from the control circuit
board. (See Figure 4-25)
FPC
Connector
Figure 4-26. FPC Connector
Figure 4-27. Metal Bracket Removal
Figure 4-28. Control Panel Assembly
Summary of Contents for E30MH65GPSA
