9
Installation
Adjusting Flipper Mullion Screw
To adjust the flipper mullion:
1
Loosen the screw located on the flipper mullion
hinge.
2 Adjust flipper mullion height. For proper
connection with the flipper mullion guide, there
should be a separation about the thickness of a
coin (0.060 inches, or 1.5 mm) between the guide
and flipper mullion.
3
Re-tighten screw.
4
Lift the door while adjusting the washer. To
raise the door, rotate washer clockwise (when
viewed from the bottom). To lower door, rotate
washer counter-clockwise (when viewed from the
bottom).
5
Re-tighten the screw, ensuring it is between the
spokes of the set washer. Screw will not be tight,
just insert until it is flush with the hinge.
Adjusting Flipper Mullion Height
Screw
Raising/Lowering Door
NOTE
If after adjusting doors higher the door makes a
popping/clicking sound, remove screw and replace
with the longer one supplied in the handle package.
