background image

conditioner. It contains 
contaminants and could make you 
sick.

10.Do not use the power cord close to 

heating appliances. It may cause 
fire and electric shock.

11.Do not damage or use an 

unspecified power cord. It may 
cause electric shock or fire.

12.Do not direct airflow at room 

occupants only. This could damage 
your health.

13.Always install circuit breaker and a 

dedicated power circuit. No 
installation may cause fire and 
electric shock.

14.Do not open the unit during 

operation. It may cause electric 
shock.

15.Do not use the power cord near 

flammable gas or combustibles, 
such as gasoline, benzene, thinner, 
etc. It may cause an explosion or 
fire.

16.Ventilate room before operating air 

conditioner if there is a gas leakage 
from another appliance. It may 
cause explosion, fire and, burns.

17.Do not disassemble or modify unit. 

It may cause failure and electric 
shock.

18.When the air filter is to be removed, 

do not touch the metal parts of the 
unit. It may cause an injury.

19.Do not clean the air conditioner 

with water. Water may enter the 
unit and degrade the insulation. It 

05 electrolux 

safety precautions

may cause an electric shock.

20.Ventilate the room well when used 

together with a stove, etc. An 
oxygen shortage may occur.

21.When the unit is to be cleaned, 

switch off, and turn off the circuit 
breaker. Do not clean unit when 
power is on as it may cause fire 
and electric shock, it may cause 
an injury.

22.Do not put a children, pet or house 

plant where it will be exposed to 
direct air flow. This could injure the 
pet or plant.

23.Do not use for special purposes. 

Do not use this air conditioner to 
preserve precision devices, food, 
pets, plants, and art objects. It 
may cause deterioration of quality, 
etc.

24.Stop operation and close the 

window in storm or hurricane. 
Operation with windows opened 
may cause wetting of indoor and 
soaking of household furniture.

25.Turn off the main power switch 

when not using the unit for a long 
time. It may cause failure of 
product or fire.

26.Do not use strong detergent such 

as wax or thinner. Use a soft cloth 
for cleaning. Appearance may be 
deteriorated due to change of 
product color or scratching of its 
surface.

27.Ensure that the installation bracket 

of the outdoor appliance is not 
damaged due to prolonged 
exposure. If bracket is damaged, 

safety precautions

 electrolux 06

Summary of Contents for E)09C2ASK(W





























Reviews: