Electrolux COMPETENCE E 6000, Operating Instructions Manual

Page: 15 / 64

Operating Instructions
15
Cooking without automatic heating up
0 1. To use, press the ring switch.
The button protrudes
2. For heating up/browning, select a high power.
3. As soon as steam starts to form or the oil is hot, turn back to the heat
setting necessary for further cooking.
4. To stop cooking, turn back to the zero position.
Zero is still visible on the corresponding ring display for approx.
3 seconds and then disappears “0“.
5. Lower the ring switch by pressing it.
Cooking with automatic heating up
When cooking with the automatic heating up function, the cooking
zone operates at full power for a certain time and then switches back
to the set lower heat setting. The ring switch calculates the time for
this “heating up“ according to the selected lower heat setting.
0 1. Turn the ring switch to the right as far as it
will go in order to start the heating up.
An A appears in the ring display “A“.
2. Next, turn the ring switch back to the
required lower heat setting.
The set lower heat setting is displayed.
After a few seconds, the “A“ appears again in
the display instead of the lower heat setting.
The lower heat setting is displayed again as
soon as the calculated time for the heating
up has expired.
3. To end cooking, turn back to the
position “0“.
2
Switch the cooking zone off approx. 5-10 minutes before cooking is
finished to make use of the residual heat. This saves electricity.