Electrolux CIS64383, User Manual

Page: 16 / 48

To leave the Menu, touch or the right
side of the display, outside of the pop-up
window. To navigate through the Menu,
use or .
7.16 Assisted Cooking
This function adjusts the temperature to
different types of food and maintains it
throughout cooking. It can only be
activated for the left front cooking zone
or both zones on the left when bridged.
1. Touch on the display to open the
Menu.
2. Select Assisted Cooking and choose
the type of food you would like to
prepare from the list.
For each type of food there are a few
options available. Follow the
instructions shown on the display.
• You can touch OK on top of the
pop-up window to use the default
settings.
• You can set the timer function.
When the pot reaches the
intended temperature you can
activate the timer.
• You can change the default heat
level.
3. Once the pot reaches the intended
temperature an acoustic signal
sounds and a pop-up window
appears. To close the window and
start the function touch OK. To
deactivate the window permanently
check before you activate the
function.
To stop the function touch and Stop
or touch
and select Assisted
Cooking, choose any type of food and
touch Stop.
To leave the Menu touch or the right
side of the display, outside of the pop-up
window. To navigate through the Menu
use or .
7.17 Melting
You can use this function to melt
different products, e.g. chocolate or
butter. You can use the function only for
one cooking zone at a time.
1. Touch on the display to open the
Menu.
2. Select Hob Functions > Melting from
the list.
3. Touch Start.
You need to select the desired
cooking zone.
If the cooking zone is already active
a pop-up window appears. Cancel
the previous heat setting to activate
the function.
To leave the Menu, touch or the right
side of the display, outside of the pop-up
window. To navigate through the Menu,
use or .
To stop the function, touch the zone
selection symbol and then touch Stop.
7.18 Hob²Hood
It is an advanced automatic function
which connects the hob to a special
hood. Both the hob and the hood have
an infrared signal communicator. The
speed of the fan is defined automatically
on the basis of the mode setting and the
temperature of the hottest pot on the
hob.
For most of the hoods the remote system
is originally deactivated. Activate it
before you use the function. For more
information refer to the hood user
manual.
To operate the function automatically, set
the automatic mode to H1 - H6. The hob
is originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes the temperature of the
cookware automatically and adjusts the
speed of the fan. You can set the hob to
activate only the light by selecting H1.
If you change the fan speed
on the hood, the default
connection with the hob is
deactivated. To reactivate
the function, turn both
appliances OFF and ON
again.
www.electrolux.com 16