Page 38
To remove and replace the lower oven temperature
probe remove the access cover plate located at the
right rear of the range when viewed from behind.
(Photo A)
Photo B
Lower Oven Temp Probe
Harness Connector
Take out the cover plate mounting screw and remove
the cover.
Once the cover plate is removed the lower oven
temperature probe connector can be disconnected
from the harness connector on the right side of the
opening. (Photo B)
Unplug the lower oven temperature probe connector
and remove the two screws that mount the probe to
the rear of the lower oven chassis. (Photo C)
The probe can now be pulled out of the chassis.
Photo C
Probe
Mounting
Screws
Replacing Lower oven temperature Probe
Photo A
Cover Plate
Mounting Screw
