something not working 51
Malfunction
Possible cause
Solution
The machine does not
empty and/or does not spin:
●
The drain hose is squashed
or kinked.
(Red Start/
Pause pilot light flashes)
●
The drain pump is clogged.
(Red Start/Pause pilot
light flashes)
●
The the option has been
selected.
●
The option
or
has
been selected.
●
The laundry is not evenly
distributed in the drum.
●
Check the drain hose
connection.
●
Clean the drain pump.
●
Not select the option.
●
Redistribute the laundry.
There is water on the floor:
●
Too much detergent or
unsuitable detergent
(creates too much foam)
has been used.
●
Check whether there are any
leaks from one of the inlet
hose fittings. It is not always
easy to see this as the water
runs down the hose; check
to see if it is damp.
●
The drain hose is damaged.
●
Reduce the detergent
quantity or use another one.
●
Check the water inlet hose
connection.
●
Change it with a new one.
Unsatisfactory washing
results:
●
Too little detergent or
unsuitable detergent has
been used.
●
Stubborn stains have not
been treated prior to
washing.
●
The correct temperature
was not selected.
●
Excessive laundry load.
●
Increase the detergent
quantity or use another one.
●
Use commercial products to
treat the stubborn stains.
●
Check if you have selected
the correct temperature.
●
Introduce into the drum less
laundry.
The door will not open:
●
The programme is still
running.
●
The door lock has not been
released.
●
There is water in the drum.
●
Wait the end of washing
cycle.
●
Wait about 2 minute.
●
Select drain or spin
programme to empty out
the water.
126.2943.04.qxd 6/3/08 19:00 Página 51