40 use
You must select this option after you
have set the programme and before you
press the Start/Pause button.
You can cancel the delay time at any
moment, before you press the
Start/Pause button.
If you have already pressed the
Start/Pause button, and you wish to
cancel the delay time, proceed as
follows:
• set the washing machine to PAUSE
by pressing the Start/Pause button;
• press the Delay Start button once, the
light relevant to the selected delay
goes off.
• press the Start/Pause button again to
start the programme.
Important!
• The selected delay can be changed
only after selecting the washing
programme again.
• The door will be locked throughout
the delay time. If you need to open
the door, you must first set the
washing machine to PAUSE by
pressing the Start/Pause button and
then wait about 2 minutes. After you
have closed the door, press the
Start/Pause button again.
The Delay Start can not be selected
with
Spin
and
Drain
programmes.
Programme progress display
By selecting the
wash
programme, the
“wash”
pilot
lights comes
on.
When the pilot
light “wash”
comes on this
means that the
machine is
performing the
washing cycle.
If you have selected the
“prewash”
function, this light will be on during the
prewash phase too.
The
“door”
pilot light indicates if the
door can be opened:
• light on: the door cannot be opened
• light off: the door can be opened
• flashing light: the door is opening
It stays on during the whole programme
indicating that the door is locked.
When the light goes out, the door can
be opened.
When the programme has finished, the
“End”
pilot light comes on.
Altering an option or a running
programme
It is possible to change any option
before the programme carries it out.
Before you make any change, you must
pause the washing machine by pressing
the
“Start/Pause”
button.
Changing a running programme is
possible
only by resetting it
. Turn the
programme selector dial to
“O”
and
then to the new programme position.
The washing water in the tub will not
emptied out. Start the new programme
by depressing the
“start pause”
button
again.
126.2943.04.qxd 6/3/08 19:00 Página 40