TSE-P 02.00 EB
18/60
599 35 24-30
VT movement during rinses in "jetsystem
total exchange" COTTON programmes – Only for models
with circulation pump (jetsystem):
During these phases, in which the motor rotates at high speed, if the electronic pressure switch detects that
the water in the tub falls below a certain level, the following operations are performed:
Ö
spin at 470 rpm (VT_MOV_CODE) to remove the water from the fabrics and therefore to increase the
level in the tub
Ö
5 seconds pause, during which the level is again checked and, if necessary, the solenoid valve is
activated in order to load water until the level is correct
Ö
energetic movement (E) (with the circulation pump in operation)
These operations may be repeated up to a maximum of three times for each rinse.
The parameters of the different programmes (levels, movements) vary according to the wash system
of the different models:
⇒
jetsystem (with circulation pump)
⇒
traditional / eco-ball
⇒
tub G20 (46 litres)
⇒
tub G21 (54 litres)
