11
Drive the machine forward by holding the hand-
grips, then rolling the thumb wheels forward until
the machine moves completely over the brushes.
To stop release the thumb wheels and they will
return to a neutral position. This will ensure the
brushes are fully located under the drive plates.
NOTE
: for the models without traction the
machine must be pushed over the brush.
Lower the brush unit by pushing the pedal to the
right to unlatch it. Then allow it to rise as far as it
will go.
The brush motors will start automatically; the
indicator will light and the motors will engage the
brushes.
PREPARATION FOR USE
14
ON
OFF
In order to achieve a further reduction of the
water flow the water pump can also be switched
off by means of push button
C
.
The same button allows to re-switch on the water
pump.
NOTE
: on all versions of model
AW445
(without
traction)
the push button
C
is not available.
Pull down the squeegee to the floor by lifting the
dedicated lever; the automatic switch-on of the
suction motor will also occur.
The relevant green light indicator will turn “on” on
the control panel.
SCRUBBING AND DRYING OPERATION
ON
OFF
C
ON
OFF