manualshive.com logo in svg

Electrolux Automower, Operator'S Manual

Share
Download
Electrolux Automower Operator'S Manual Download Page 24

24

electrolux

 automower

Installation

7.

Refit the cover on the charging station. Ensure the 
three guides on the charging station enter the right 
holes in the cover.

G. Checking the installation

Check the loop signal by looking to see what indication 
the green LED on the charging station is giving.

•

Steady light = the signal is okay.

•

1 flash every other second = break in the loop and 
no signal found.

•

2 flashes every other second = signal found, but the 
wire is probably damaged. Check all wire 
connections.

H. Linking the Automower™ to the 
charging station.

1.

Open the control panel cover by pressing the 
STOP button.

2.

Place the Automower™ in the charging station.

3.

Set the main switch to the ON position.

A start-up sequence begins when the 
Automower™ is started for the first time. The 
following is requested: Language, time format, 
correct time, date format, date, and four-digit PIN 
code. All combinations except 0000 are permitted.

When you have chosen a PIN code with the 
Automower™ placed in the charging station, the 
mower and charging station are then linked to each 
other.

More than one Automower™ in a garden

If you install more than one Automower™ in the same 
garden, each mower must have its own PIN code. 
However, if the boundary wires are laid at least 40 cm 
from each other the mowers can have the same PIN 
code. This will mean that about 20 cm between the 
working areas will not be mowed.

If you have one Automower™ for several gardens with 
one boundary wire and charging station per garden the 
mower can have the same PIN code for all the gardens.

Contact your dealer for further information.

3012-270

3012-282

3012-385
3012-408

Summary of Contents for Automower

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands