manualshive.com logo in svg

Electrolux Automower, Operator'S Manual

Share
Download
Electrolux Automower Operator'S Manual Download Page 10

 

10

electrolux

 

 automower

 

Presentation

Function of Automower™

 

Working method

 

The Automower™ automatically mows the lawn. 
It continuously combines mowing and charging.

The charging station sends out a signal that the 
Automower™ can sense at a distance of 6 - 8 metres. 
The mower starts to seek out the charging station 
when the capacity of the battery becomes too low. The 
Automower™ does not mow when it is searching for 
the charging station.

When the battery is charged the mower reverses, turns 
around and leaves the charging station in a randomly 
selected direction within the exit sector 90°-270°.

To make it easier for the Automower™ to reach all 
parts of the garden you can manually set how the 
mower will leave the charging station, see ”3. Garden” 
on page 31.

When the Automower™ body hits an obstacle, the 
mower reverses and selects a new direction.

Two sensors, at the front and back on the 
Automower™, sense when the mower approaches the 
boundary wire. The Automower™ overruns the wire by 
up to 27 centimetres before it turns. The overrun length 
can be set, see ”Drive past wire (3-2)” on page 34.

 3012-233

 3012-379

3012-380

Summary of Contents for Automower

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands