Installation
Unpacking
All transit bolts
and packing
must be
removed before
using the appli-
ance.
Using the sup-
plied spanner,
unscrew and remove the 2 rear bottom
screws. Slide out the 2 plastic pins. Lay the
machine on its back, taking care not to
squash the hoses. This can be avoided by
placing one of the corner packing pieces
between the machine and the floor.
Remove the polystyrene block from the
bottom of the machine and release the
two plastic bags.
Carefully slide out
the left-hand bag
removing it
towards the right
and then down-
wards.
Slide out the
right-hand bag
removing it
towards the left
and then
upwards.
Set the machine
upright and
remove the
remaining rear
screw. Slide out the relevant pin.
Plug the open holes with the plugs which you will find in the plastic bag
containing the instruction booklet.
You are advised to keep all transit devices so that they can be refitted
if the machine ever has to be transported again.
74
P1129
P0001
P1124
2
3
1
P1
P1126
126
P1127
P1128
P0002
132982560_gb.qxd 10/02/2006 17.20 Pagina 74
