g
19
Cleaning and care
Motor casing
1
Ensure that no liquid enters the motor
casing!
0
Clean the motor casing with a moist
cloth.
Never immerse in water or hold
under running water!
Mixer
3
Container and blade can be cleaned
easily and properly with the aid of the
pulse position.
0
Fill the mix container half full with
warm (not hot!) water and add a few
drops of detergent.
0
Press the pulse button briefly.
0
Then rinse the container under running
water.
Dismantle/fit blade unit (fig. 14)
3
If necessary, the blade unit can also be
dismantled and cleaned separately.
1
Caution: The blade is very sharp!
Danger of injury!
0
Release blade unit (fig. 14/a) from mix
container using the closing cover
(fig. 1/D and fig. 14/c) as tool. The
grooves of the closing cover fit the ribs
of the blade unit. Turn
counter-clock-
wise
and remove while holding slightly
at an angle.
0
Remove gasket (fig. 14/b) from blade
unit.
1
The blade unit is very sharp. The gasket
can be damaged.
1
Rinse the components carefully by
hand (
danger of injury!
). Use only
water and detergent for cleaning.
Do not clean the blade unit in a dish-
washer.
0
Insert gasket in blade unit.
0
Insert blade unit in container from
below. Hold blade unit at a slight angle.
Tighten blade unit using the closing
cover as tool by turning
clockwise
(fig. 14).
All-purpose bowl and tools
0
The all-purpose bowl and tools should
be cleaned in rinsing water.
1
Caution: The metal blade is extremely
sharp! Danger of injury!
1
Plastic parts age more quickly if
cleaned frequently in a dishwasher. If
they are nevertheless to be cleaned in a
dishwasher, they must be placed in the
upper basket.
Inserts
0
Clean inserts with brush or cloth under
running water or in a dishwasher!
1
Caution: The inserts are very sharp!
Danger of injury!
Storage
All accessories except the citrus press
can be stored directly in the appliance.
• Store the inserts in the accessories
compartment (fig. 1/K).
1
Caution: The inserts are very sharp.
Danger of injury!
They should only be
held by the handle!
• Stow the accessories away in the all-
purpose bowl as shown in fig. 12.
1
Caution: The metal blade (fig. 1/Q) is
extremely sharp! Danger of injury!
Hold the metal blade only by the han-
dle and store only with the blade guard
fitted!
• Wind the cable round the two hooks at
the rear of the appliance (fig. 15).
Technical data
Mains voltage: 230 – 240 V
Power consumption: 800 W
822_949_452 FP4200-4400_AEG.book Seite 19 Donnerstag, 12. Februar 2009 11:19 23