ARESI1006
Copyright 2018 ELECTROLUX HOME PRODUCTS PTY LTD Technical Services
53
Water Valve
Dispense
+
Main Valve
Press (MODES) to
change the status
of the Function
c. Be prepared to collect water at
dispenser.
d. Water dispenses when “on”; stops
when “oF”.
e. Press (MODES) button to change the
status
56
Ice Maker
Water Valve
+
Main Valve
Press (MODES) to
change the status
of the Function
a.
Remove ice tray to collect water
into a measuring container to
measure water fill
.
b. If collecting water into ice tray, first
perform test n° 50 to empty ice tray.
c. Water flows in the tray when “on”.
The Function is active for the time
correspondent to ice tray water fill
setting. According to water setup
configured it is possible to check very
high pressure, normal pressure, low
pressure, very low pressure; once
that the configured time is elapsed the
Function goes automatically to “oF”
state.
d. Press (MODES) button to change the
status
71
Fresh Food
Defrost
Heater
Press (MODES) to
change the status
of the Function
a. Heater on when “on”, off when “oF”.
b. Fresh Food Evaporator Defrost
Sensor temperature is flashed on the
display.
c. Watch for temperature increase with
the heater on.
d. It may take a few minutes for the
evaporator to heat up. Maximum 5
minutes ON or 45°C Fresh Food Evap
Defrost sensor threshold.
e. Press (MODES) button to change the
status
72
Ice Maker
Defrost
Heater
Press (MODES) to
change the status
of the Function
a. Heater on when “on”, off when “oF”.
b. IceMaker Evaporator Defrost Sensor
temperature is flashed on the display.
c. Watch for temperature increase with
the heater on.
d. It may take a few minutes for the
evaporator to heat up. Maximum 5
minutes ON or 45°C IM Evap Defrost
Sensor threshold.
e. Press (MODES) button to change the
status
Displayed
code
Function
Test
Action Available Behavior Expected