ARESI1006
Copyright 2018 ELECTROLUX HOME PRODUCTS PTY LTD Technical Services
d. Press + button if you want to skip this
visualization and pass to the next record
c-
Ruby UI
Firmware
Version
Runs Automatically,
scrolling all the digits
of the string.
a. Displays digits sequence related to the
ID string or firmware version of Ruby
User Interface (main Internal UI)
b. It is built of 8 digits.
c. For Example: “
1GAB0002
”
d. Press + button if you want to skip this
visualization and pass to the next
record .
d-
Indigo
Firmware
Version (VCZ
drawer)
Runs Automatically,
scrolling all the digits
of the string.
a. Displays digits sequence related to the
ID string or firmware version of Indigo
User Interface (VCZ drawer UI)
b. It is built of 8 digits.
c. For Example: “
MHFE0600
”
d. Press + button if you want to skip this
visualization and pass to the next
record .
d-
Cobalt I&W
Firmware
Version
(external 4
buttons)
Runs Automatically,
scrolling all the digits
of the string.
a. Displays digits sequence related to the
ID string or firmware version of Cobalt
External User Interface (4 buttons I&W
and Wifi UI)
b. It is built of 8 digits.
c. For Example: “
LHIW0400
”
d. Press + button if you want to skip this
visualization and pass to the next
record .
At the end of all the Software Version visualizations, one section is related to display the appliance
lifetime
(how much it has been powered up, even not consecutively).
The maximum value can be 9999 days so 4 digits are needed to display whole information;
a-
Lifetime
Press + button, to
pass to the next digit.
a. Displays lifetime sequence related to the
number of days from the 1
st
startup.
b. It is built of 4 digits starting from Most
Significant digit.
It is possible to represent a number
between
0-9999 days
.
c. For Example: “
0077
” means 77 days.
d. Press + button to pass to the next digit.
At the end of the Lifetime visualization, the last section is related to display a free counter.
It is a 1 second up-counting timer (0,1,2,3…) and the digit is displayed on the display.
This phase communicates that Service Mode has come to end.
To return to normal mode you have to press and hold
+
and
– buttons
for 10 seconds or unplug
the appliance and plug it again.
Display
code
Function
Test
Action Available Behavior Expected