Electrolux 68001KF-N, User Manual

Page: 10 / 32

10
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that
are switched on to the keep warm setting and then back to the heat
setting that was previously set. This function can be used to briefly in-
terrupt and then continue the cooking process e.g. to take a telephone
call.
3
Timer functions are not stopped by STOP+GO.
3
STOP+GO locks the whole control panel except the sensor field .
Using the automatic warm-up function
All cooking zones are equpped with an automatic warm up function
When setting a heat setting using
, when starting from
¾
, the cook-
ing zone switches to full power for a certain amount of time and then
automatically switches back to the heat setting set.
3
If during the automatic warm up
a
a higher heat setting is selected,
e.g. from
Á
to
Ã
, the automatic warm up is adjusted.
Control panel Display
To switch
on Touch STOP+GO
u
To switch
off Touch STOP+GO heat setting that was previ-
ously set (not automatic
warm up function)
Control
panel possible
heat set-
tings Display
Switch on
(only when starting at
¾
)
Touch
¿
to
Æ a
(after 5 sec-
onds)
Switch off Touch
Æ
to
¿
/
u
Æ
to
u
Not used Touch
Ç
to
u Ç
to
u