4
Using the cooker hob
Control knobs on the gas hob
(Fig. 1)
The knobs for using the gas hob of the cooker are
found on the control panel. The regulation knobs could
be turned in anti-clockwise direction until the small
flame symbol, and vice-versa for the larger symbol.
No gas supply
Maximum gas supply
Minimum gas supply
Ignition of hob burners
To ignite a burner, before positioning the saucepan,
proceed as follows:
1. push the corresponding knob in completely
and turn in anticlockwise direction to the
maximum position;
2. upon ignition regulate the flame as required.
Mod.
65 G - 95 G
1. push the relevant control knob in completely
and turn in an anticlockwise direction to the
maximum position;
2. press the ignition switch marked by a small
spark ( );
3. upon ignition regulate the flame as required.
In models provided with a safety device
("thermocouple", Fig. 2-D), the control knob must be
pressed in for approximately
5 seconds
until the
safety valve automatically keeps the flame lit.
If after a few attempts the burner does not ignite, check
that the burner cap and crown (Fig. 2-A,B) are correctly
positioned.
To interrupt the supply of gas, turn the knob in a
clockwise direction to the position "
l
".
During cooking, when using fats or oils, take
particular care as they can, when over-
heated, self-ignite.
When using the triple-crown burner, place
the special grid on the pan support (Fig. 3-A).
When using the auxiliary burner (with pans
having a diameter equal or higher than
50mm), place the special grid on the pan
support, as shown in Fig. 3-B.
Triple-crown burner
In models provided with triple-crown burner, always
ignite the burner before putting the pans on.
If after a few attempts the burner does not ignite, check
that the burner cap and crown are correctly positioned.
Fig. 3
F
Fig. 2
FO 0204
A
- Burner Cap
B
- Burner crown
C
-Spark generator
D
- Thermocouple
A
B
D
C
B
A
FO 1079
Fig. 1
F