CLEANING
(DO NOT USE ANY DETERGENT)
7. Always store iron on its heel rest.
To clean exterior surfaces, use a damp soft cloth and
wipe dry. Do not use any chemical solvents, as these
will damage the surface.
8. Self-cleaning function.
Hold iron over a sink. Fill
with water. Heat up iron. Move steam button to
self-cleaning position, hold for 5 seconds to empty
water from steam holes. Release button to stop self-
cleaning function.
9. Cleaning the soleplate.
Do not use scouring pads
or harsh cleaners on the soleplate as these will
damage the surface. To remove burnt residue, iron
over a damp cloth while iron is still hot. To clean the
Glissium™ soleplate, simply wipe with soft damp
cloth and wipe dry.
TROUBLESHOOTING
Problem
Possible cause
Solution
Soleplate is not heating even though
iron is turned on.
Connection problem
Check main power supply cable, plug
and outlet.
Temperature control is in MIN position.
Select adequate temperature.
Iron does not produce steam.
Not enough water in tank.
Fill water tank (see “Getting started”,
no 2).
Steam control is selected in non-steam
position.
Set steam control between positions of
minimum steam and maximum steam
(see “Ironing chart”).
Selected temperature is lower than that
specified to use with steam.
Increase temperature to at least
.
Spray function does not work.
Not enough water in tank.
Fill water tank (see “Getting started”,
no 2).
Steam jet and vertical steam jet
function does not work.
Steam jet function was used very
frequently within a short period.
Put iron on horizontal position and
wait before using steam jet function.
Iron is not hot enough.
Adjust the proper temperature to
steam ironing (up to
). Put iron
in vertical position and wait until
temperature indicator light turns off.
Brown streaks come out of the
soleplate while ironing and stain the
linen.
You have used hard water, which has
caused scale flakes to develop in the
water tank.
Use the self-clean function one or
more times.
You have used chemical descaling
agents.
Do not use any descaling agents.
Fabric fibres have accumulated in the
holes of the soleplate and are burning.
Use the self-clean function one or
more times. Clean the soleplate with a
damp soft cloth.
Fabrics might not be properly rinsed or
the garments are new and have not been
washed before ironing.
Please rinse the laundry properly
again.
DISPOSAL
Recycle the materials with the symbol
.
Put the packaging in applicable containers to recycle it.
Help protect the environment and human health and to
recycle waste of electrical and electronic appliances.
Do not dispose appliances marked with the symbol
with the household waste. Return the product to your
local recycling facility or contact your municipal office.
23
BG
EE
NO
FR
RU
CS
LT
EN
PL
HR
SK
SV
DA
LV
ES
PT
HU
SL
TR
DE
NL
FI
RO
IT
SR
UK
