MAINTENANCE
REPLACING THE DUSTBAG
Always operate the cleaner with the dustbag installed.
If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not
close completely.
After removing the flexible hose, open the front cover using the compartment open
button. (fig. 23)
Remove the dustbag and insert a new one. (fig. 24)
Close the cover by pressing down until it clicks.
The dustbag reference number is U66
REPLACING THE TEXTILE DUSTBAG
Remove the textile bag from the holder. (fig. 23)
Slide the plastic clip away from the bag to open and empty. (fig. 25, 26)
Replace the plastic clip ensuring that both sides of the bag are parallel. (fig. 25)
Replace the bag into the holder.
Note: The bag may be washed in luke warm water and dried completely. It should not be washed
in washing machine. (fig. 27)
Close the cover by pressing down until it clicks. (fig. 23)
BLOCKED AIRFLOW AND DIRTY FILTERS
The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters are
blocked with dirt.
Disconnect from mains and allow the cleaner to cool for 45-60 minutes. Remove blockage
and/or clean filters.
Restart the cleaner.
REPLACING THE FILTERS
The dustbag must be replaced if the window of the dustbag full indicator is completely red
when the cleaner is operating at maximum power and the nozzle is raised from the floor.
Filters should be replaced at least twice a year or when they become visibly soiled.
Always operate the cleaner with filters installed to avoid reduced suction.
Disconnect from electrical outlet before changing the filters.
Slide back dustbag and remove the motor protection filter. Replace it with a new one. (fig. 28)
Open the front cover to remove the exhaust filter with grill. (fig. 29)
Take the filter out of the grill and replace it with a new one. (fig. 30)
Put the filter with grill back to the cleaner and close the front cover. (fig. 29)
4106 • 4111 • 4116
4106 • 4111 • 4116
