8
Section B - Replacement of parts
5.0 HOW TO REPLACE THE ELECTRICAL CORD
1. Disconnect Warmer Drawer from electrical supply.
2. Remove the drawer from the drawer cavity. (Section 1.0)
3. Remove the appliance from the cabinet. (Section 3.0)
4. The electrical cord is located at rear of the appliance
proceed from steps 4 to 6 under section 3.0 to have
access to the electrical cord.
2. Disconnect the electrical cord. (Figure 5)
3. Replace the electrical cord and reassemble in reverse
order.
6.0 HOW TO REPLACE THE WARMER DRAWER ELEMENT
1. Disconnect Warmer Drawer from electrical supply.
2. Remove the drawer from the drawer cavity. (Section 1.0)
3. Remove the appliance from the cabinet. (Section 3.0)
4. Proceed from steps 4 to 6 under section 3.0 to have
access to the element.
5. Remove the 2 screws at the rear. (Figure 6)
Figure 5
Figure 6
6. Remove the 2 screws at the front of the element. (Figure
7)
7. Disconnect the 2 wires.
8. Replace the element and reassemble in reverse order.
Figure 7
Summary of Contents for 318202107
