background image

17

NOTES:

Turning the refrigerator temperature control to “

0

” turns off the compressor, but does not disconnect electrical

power to the light bulb or other electrical components. To turn off power to your refrigerator, you must unplug
the power cord from the wall outlet.

Do not use razor blades or other sharp instruments which can scratch the appliance surface when removing
adhesive labels. Any glue left from tape or labels can be removed with a mixture of warm water and mild
detergent, or, touch the glue residue with the sticky side of tape you have already removed. 

Do not remove the

serial plate.

Care & Cleaning

Keep your refrigerator and freezer clean to prevent odor build-up. Wipe up any spills immediately and clean both sections
at least twice a year. 

Never 

use metallic scouring pads, brushes, abrasive cleaners or strong alkaline solutions on any

surface. 

Do not

 wash any removable parts in a dishwasher. 

Always unplug the electrical power cord from the wall

outlet before cleaning.

When moving the refrigerator, pull straight out. Do not shift the refrigerator from side to side as this
may tear or gouge the floor covering. If the refrigerator has an automatic ice maker, be careful not to
move the refrigerator beyond the plumbing connections.

Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.

Care & Cleaning Chart 

Part 

What To Use 

Tips and Precautions 

Interior/Door 
Liner 

 

Soap and water 

 

Baking soda and water 

Use 2 tablespoons of baking soda in 1 quart of warm water

. Be sure to wring 

excess water out of sponge or cloth before cleaning around controls, 
light bulb or any electrical part.

 

Door Gaskets 

 

Soap and water 

Wipe gaskets with a clean soft cloth. 

Drawers/Bins 

 

Soap and water 

Do not wash any removable items (bins, drawers, etc.) in dishwasher. 

Glass Shelves 

 

Soap and water 

 

Glass cleaner 

 

Mild liquid sprays 

Allow glass to warm to room temperature before immersing in warm water. 

Toe Grille 

 

Soap and water 

 

Mild liquid sprays 

 

Vacuum attachment 

Vacuum dust from front of toe grille. Remove toe grille (See illustration on 
page 4). Vacuum backside and wipe with sudsy cloth or sponge. Rinse and 
dry. 

Exterior and 
Handles 

 

Soap and water 

 

Non Abrasive Glass  

        Cleaner 

Do not use commercial household cleaners, ammonia, or alcohol to clean 
handles. Use a soft cloth to clean smooth handles. 

Do Not use a dry cloth to 

clean smooth doors. 

Exterior and 
Handles 

(Stainless Steel 
Models Only) 

 

Soap and water 

 

Ammonia 

 

Stainless Steel Cleaners 

Clean stainless steel front and handles with non-abrasive soapy water and a 
dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn spots with an 
ammonia-soaked paper towel, and rinse. Use a non-abrasive stainless steel 
cleaner. These cleaners can be purchased at most home improvement or 
major department stores. Always follow manufacturer's instructions.      

NOTE: Always clean, wipe and dry with the grain to prevent cross-grain 
scratching.

 Wash the rest of the cabinet with warm water and mild liquid 

detergent. Rinse well, and wipe dry with a clean soft cloth. 

 

Summary of Contents for 241567600





















Reviews: