37
How to use your
Refrigerator-Freezer
Switch off the refrigerator or freezer using the power
switch on the panel.
a - for the refrigerator
f - for the freezer
To avoid accidentally switching off the power to the
refrigerator or freezer, the button must be kept pres-
sed for about 1 second.
m
The entire cabinet unit will be de-energized after
the power supple plug has been pulled out of
the socket.
Freezer Compartment
This freezer, is marked , and is
suitable for freezing fresh foodstuffs and
keeping food for long periods.
Freezing of food
Freezing should take place as quickly as possible, in
a maximum of 24 hours. The procedure for this is as
follows:
1... Push the «ACTION FREEZE» button. The
yellow lamp «e» will light up.
If the freezer was switched off and empty, 3
hours prior to placing the food to be frozen.
If the freezer is already operating and contains
frozen food, 24 hours before placing the food to
be frozen.
2... The maximum amount which can be frozen in 24
hours is indicated in the section
«Technical
Features»
.
3... Place the food to be frozen inside the lower com-
partment of the freezer. You can also use the top
shelf. If necessary, the highest capacity of free-
zing is reached removing the lower basket.
4... Red light «l», may be on for a few hours
during freezing process. Switch-on time for
this light will vary according to amount of food being
Starting, setting the
temperature, switching off
The refrigerator and freezer compartments can be
used independently.
Switching on
1... Insert the power plug in a household Ac outlet.
2... Press the power switches «a» and «f» on the panel
to turn on the power.
3... If the temperature is too high in the cabinet, the tem-
perature alarm sounds.
Turn off the alarm by pressing the alarm shut-off but-
ton «k».
Setting the temperature
The recommended temperature
for the refrigerator is +4°C / +6°C
for the freezer is -18°C / -20°C
Use the temperature adjustment buttons «c» (refrigera-
tor) and «h» (freezer) to set the temperature.
Press «+» to set a higher temperature.
Press «-» to set a lower temperature.
Keep pressing until the desired temperature is shown in
the temperature display. The display will then stop flas-
hing.
The freezer temperature display shows the current tem-
perature inside the cabinet.
The refrigerator temperature display shows «-» until the
temperature inside the cabinet r 9°C.
It is not necessary to set the temperature anew when the
cabinet is switched on after it has been out of use. The
thermostat remembers the previously set temperature.
Switching off
To switch off the entire cabinet
Press the power switches «a» and «f» on the panel to
switch off the cabinet.
To avoid accidentally switching off the refrigerator or free-
zer, the power switch must be kept pressed for about 1
second. Disconnect the power plug from AC outlet.
To switch off only the refrigerator or freezer