Data di emissione: Agosto, 2019 Revisione: 0 Pag. : 6/24
-
E
mpty the bowl of any remaining product.
-
R
emove both the main lid and then the
transparent one.
-
F
ill the bowl with lukewarm water to help
melt off any sugar residuals and drain this water
before proceeding with the next step.
!Caution!
T
o avoid electrical shock or contact with
moving parts, before proceeding with the
disassembling operations, make sure all
switches are in “OFF” position and that the
main power supply is disconnected.
-
P
ull out the upper mixing device (O) by
pushing it slightly backwards, to remove it from
its fixed position (see figure 1).
-
U
nscrew and slip off the knobs then lower the
bowl to eliminate any product residue through
the dispensing tap.
-
S
lightly move down the bowl as shown in
figure 2 while pulling it outwards, this operation
will help fully removing it from its seating.
-
S
imultaneously apply pressure to the two
securing tabs (Q), and lift the dispensing tap (I)
to pull it out of its fixed position (see figure 3).
-
D
isassemble the dispensing tap by keeping
the indicated part (R) pressed down and slipping
off the dispensing lever (L) (see figure 4).
-
T
horoughly wash each single part with hot
water and mild dishwashing detergent, rinse
well, and reassemble the parts.
!Caution!
T
o prevent bacteria growth, remove all
O
-rings when cleaning.
F
ailure to do so could create a health
hazard.
Fig. 1
Fig. 2
Fig. 3
Fig. 4