Electrolux Professional IB42310, Installation Manual

Page: 16 / 24

16
Installation manual
Important
The control pedal must not be operated before making the following checks.
If the functioning of the machine does not correspond to either case (A) or (B), stop the machine with the On/Off
switch, put the main switch to Off and invert the 2 phase wires on the power supply terminal block.
(A) Phases in good order and bed closed (B) Phases in good order and bed opened
When starting up the ironer, the cylinder does not rotate and the bed
moves away from the cylinder.
Everything is OK.
You can operate the ironer.
When starting up the ironer, the cylinder does not rotate and the bed
does not move.
Everything is OK.
You can operate the ironer.
(C) Inverted phases and bed closed (D) Inverted phases and bed opened
When starting up the ironer, the bed remains closed, the cylinder ro-
tates in the right way but the hand safety device is inoperative.
Do not use the machine.
Modify the phases order (see below).
When starting up the ironer, the cylinder rotate in the wrong way and
the bed blocks in rear position.
Release the bed and modify the phases order (see below and next
page).
• Repeat operations points 1, 2 and 3, the tray should now move back.
• Turn the main switch off.
• Reinstall the side panels and lock the fixing screens.
• Remove the protective paper from around the cylinder.
• The ironing machine is now ready to be used.
Note!
At the first use, it is necessary to leave the cylinder heated turn for about one hour to allow the padding to
ram. This running in allows to get a space between the bed and the cylinder in order to feed the linen easily.