Electrohome EAAC500, User Manual

Page: 7 / 24

- 7 -
OPERATION
POWER CONNECTION
Plug the AC power cord to a household outlet AC source. Clock display will flash
“3“ indefinitely. Unit will go to zone 3, which is the default setting, and correct time
will be displayed, if you are in a different time zone.
To Set time Zone:
This product is factory preset.
There are 6 time zones programmed into your preset clock:
Zone 1 – Newfoundland
Zone 2 – Atlantic Time
Zone 3 – Eastern Time
Zone 4 – Central Time
Zone 5 – Mountain Time
Zone 6 – Pacific Time
Press the >> / DST button or >> / Y-M-D button to select 1-6 time zone. Until your
own time zone number appears on the LED display, press the MODE button to
save.
DST - Daylight Savings Time
Press >> / DST button and hold for 3 seconds to toggle on and off DST function.
MANUALLY SET THE CLOCK TIME AND DATE
1. Press and hold the MODE button in normal mode to enter the set mode.
2. Press the MODE button repeatedly to cycle through the available settings in
this order:
Year >> Month >> Day >> 12/24 Hr >> RTC Hour >> RTC Minute
Action (during data adjustment) :
• Press << / Year – Month – Day button (3) to adjust data backward.
• Press >> / DST button (4) to adjust data forward.
• Keep depress << or >> button for 2 seconds to enable auto forward.
Setting Alarm 1 and Alarm 2
1. Press alarm set button (2) during normal mode and keep depress over 2
seconds to enter alarm set mode.
2. Press alarm set button (2) to change the mode cycle as follows:
Normal >> AL 1 Hour >> AL 1 Min >> AL 1 Weekday Alarm >> AL 2 Hour >> AL
2 Min >> AL 2 Weekday alarm >> Normal