- 18 -
Output Channel
• Press VCR on remote control to change into
VCR mode.
1. Press SETUP on the remote control. The setup
menu is displayed.
2. Press [
] Navigation button to select “Option”
and press OK.
3. Press [
] Navigation button to select “Output
Channel”. Press OK repeatedly to select
channel. (“Ch3” or “Ch4”)
4. Press SETUP to exit the menu.
SETUP
Select : Ok
Clock set
Program Set
Channel Set
Language Select
Search
Option
Quit : Setup
SETUP
Select : Ok
Clock set
Program Set
Channel Set
Language Select
Search
Option
Quit : Setup
ACS Set (Auto Clock Set)
Automatically sets the time and date once the VCR
is plugged in and the antenna/cable is hooked up.
Clock and date information is based on signal from
your local public broadcasting service station. This
feature can reset the time and date after power
outages, and for daylight savings time. Press VCR
on remote control to change into VCR mode.
1. Press SETUP on the remote control. The setup
menu is displayed.
2. Press [
] Navigation button to select “Option”
and press OK.
3. Press [
] Navigation button to select “ACS
Set”. Press OK repeatedly to select On or Off.
4. Press SETUP to exit the menu.
SETUP
Select : Ok
Clock set
Program Set
Channel Set
Language Select
Search
Option
Quit : Setup
SETUP
Select : Ok
Clock set
Program Set
Channel Set
Language Select
Search
Option
Quit : Setup
OPTION
Select : Ok
OSD Display
Auto Power Off
Output Channel
ACS Set
Quit : Setup
On
Yes
Ch3
Off
OPTION
Select : Ok
OSD Display
Auto Power Off
Output Channel
ACS Set
Quit : Setup
On
Yes
Ch3
Off
ELECTROHOME DVC510E_EngP11-18.p65
5/3/2007, 9:47 AM
18
