3. Securely anchor the plasma static mount to wall studs or supporting framework (see WARNING).
4. Make sure the flag is lowered to the side before attempting to place the plasma on the mount.
5. With the aid of another person, lift the plasma display up to the mount, align the mounting buttons on the
plasma with the teardrop slots in the mount, and set the plasma into place (see Figure 5).
CAUTION
If the latches will not travel to the full upright position, remove and reseat the display.
6. Position (raise) the flags to secure the plasma.
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4 TIMES THE
COMBINED WEIGHT OF ALL COMPONENTS PLUS THE EQUIPMENT
BEING MOUNTED. IF IT CANNOT SUPPORT THIS WEIGHT, THE
STRUCTURE MUST BE REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE MOUNT IS 150
POUNDS (68.04 KG).
WARNING
Figure 5
