This document is a property of ElectroFlip LLC (www.ElectroFlip.com).
No unauthorized reproduction is allowed.
12
CHECK iTRACK2 STATUS
This command is to check the status/state of your tracker in terms of power, battery level, GPS and GSM
signal. To check, send the text message containing:
Message Format:
check+password
Text Message/Command: check123456
Reply: Power: Power off
(could either be Power off/charging/charge finish)
Battery: 100%
(this will decrease as unit is used)
GPS: OK
(or NO GPS)
GSM Signal: 1-32
(The higher the number shown the stronger the GSM signal)
CHECK IMEI
To check the 15 digit IMEI (International Mobile Equipment Identity) number of your tracking unit, send
a text message containing:
Message Format:
imei+password
Text Message/Command: imei123456
Reply: 15 digit IMEI number
SETTING THE TIME ZONE OF YOUR TRACKER
Different countries as well as different state in the US observe different time zones. If you do not
know your specific time zone please search it through Google before configuring this setting. Then,
send a text message containing:
Message Format:
time+space+zone+pspace+time
Text Message/Command: time zone123456 -8
(
Note:
-8 is the Pacific Coast time zone)
Reply: time ok
MONITOR (SOUND SURVEILLANCE) MODE
To monitor the surrounding sounds to help identify what’s going on at the location it’s in, send a text
message containing:
Message Format:
password
Text Message/Command: monitor123456
Reply: monitor ok
