This document is a property of ElectroFlip LLC No unauthorized reproduction is allowed.
5
2.
Turn the device ON by either pressing the Power button (if using battery power) or by starting the
car (if device is connected to a car charger). The recording indicator light (REC/SNAP
WORKING) will blink while it is recording. The video files are automatically saved to the SD/MMC
card.
NOTE: If S/MMC card is already full, the device will automatically starts to record over the oldest video
files first. The device will pause recording for 3 seconds then starts to overwrite the old video files.
TAKING A PHOTO
1.
Turn on the iDrive2.
2.
Press Mode button to enter the Camera Mode.
3.
Press the REC/SNAP button to take a photo. Photo will be automatically saved to the SD/MMC
card.
PREVIEW/DELETE VIDEOS AND PHOTOS
Video/Photo Preview
1.
Turn iDrive2 on.
2.
Press Mode button twice to enter the Preview Mode.
3.
Press Up or Down button to select a video file.
4.
Press REC/SNAP button to play or stop the video.
Delete a Video/Photo
1.
Turn iDrive2 on.
2.
Press Menu button to enter Delete Mode.
3.
Select Single, All or Select by using the REC/SNAP button and UP or DOWN buttons.
4.
Press REC/SNAP button to confirm file deletion.
NOTE: You can also select Thumbnail Mode and Volume (from 1 to 8) in the Preview Mode.
FUNCTION SETUP
The device has different functions that you can setup. To configure the settings for each functions please
follow the steps below:
1.
Turn ON the device.
2.
Press the Mode button while in Video or Camera Mode to enter the setting's interface.
3.
Confirm selection by pressing REC/SNAP button.
4.
Select by pressing Up and Down buttons for the different settings.
5.
Press the Menu button to exit after you finished the setup.
