User Manual SCA-SE-30-06
ElectroCraft
®
E-Mail: [email protected] www.electrocraft.com May 2009
5
2.2 Mechanical
Data
Mechanical Dimensions L x W x H
121 x 100 x 40 mm
Weight 380
g
Mounting
M3 screws or Din Rail Mounting
2.3 Ambient
Conditions
Operation Temperature
-10 to +45
o
C
Storage Temperature
-40 to +85
o
C
Humidity (Non Condensing)
20 % to 80 % RH
Overtemperature Protection
+80 °C
2.4 Digital and Analog Inputs
Enable
8…+30 VDC; Resistance = 30 kOhm
Encoder A, /A, B, /B, I, /I
TTL, +5 to +30 VDC;
Resistance > 10 kOhm; max. 600 kHz
-Set value, +Set value
Analog -10 – +10 VDC ;
Resistance = 20 kOhm
-Tacho, +Tacho
Analog -50 – +50 VDC ;
Resistance = 50 kOhm
24V Opt. In
+24 VDC; Resistance = 4,7 kOhm
2.5 Outputs
Auxiliary Voltage Output
+Reference
+3,9 VDC / 20 mA
Auxiliary Voltage Output
-Reference
-3,9 VDC / 20 mA
Auxiliary Voltage Output
V
27 kOhm to +VCC
Auxiliary Voltage Output
+5V
+5 VDC / 100 mA
Error out
Open Collector / +30 VDC; max. 20 mA
-Tacho out, +Tacho out
Analog -3,9 – +3,9 VDC ; max. 20 mA;
Resistance = 100 Ohm
2.6 Control
LEDs
OK
LED green
The LED is lit when the drive is ready to
work.
Fault
LED red
The lamp is lit if the overtemperature, the
undervoltage, the overvoltage or the
overcurrent protection circuit have been
initiated.
