properly connected and in good condition.
2.
If the dot flashes, check your addressing as well as the polarity of your DMX wiring.
3.
Try an other DMX controller
4.
Avoid to lay your DMX cables alongside high-voltage lines to avoid interference.
C.In Master/Slave Mode some devices don’t properly respond
1.
Check cables and the connection diagram.
2.
Check that devices are properly assigned in Master/Slave mode.
6. Cleaning
Before any cleaning
operation, unplug the
spotlight power cord in order to avoid any electrocution risk. Cleaning the optic must be done
periodically in order to optimize the spotlight’s brightness. The cleaning frequency depends on
the operating environment. Smoke and dust may cause a large accumulation of dirt upon the
spotlight’s optics :
-
Clean it with a soft dry cloth.
-
Do not use liquid or detergent products.
-
Clean external lenses approximately every 20 days, with a soft dry cloth, without overly
pressing on the lenses.
ELECTROCONCEPT SARL LA GARE 69620 CHAMELET FRANCE
12
