background image

LS550-RGB3000

LASER PROJECTOR

INSTRUCTION MANUAL

   

Introduction

 

    :  

Thank you for purchasing this Electroconcept product.
Please carefully read this manual before using this laser projector.
 

Responsibility

 

    :  

On no account the Electroconcept company shall be held responsible for any damages of any
nature whatsoever, notably the operating loss, destruction of consumables (tape, disc, CD) or
any other financial loss resulting from the use or the impossibility to use your equipment. In
addition Electroconcept shall not be held responsible for damages due to an improper use of
this product.

Warranty

 

    :  

 

Electroconcept products have a 2 years manufacturer warranty (1 year for electronic, laser
sources, galvas and fan). The equipment shall be returned  prepaid  (at the customer's own
expense). Any freight collect will be refused. The equipment shall be returned in its original
packaging. The equipment's restitution will be at our own expense.
Are excluded from warranty: damages due to fault, negligence, lack of maintenance by the
user (broken, burnt, heated, wet, sandy...etc devices), already installed devices of which the
failure would originate from an improper installation or use by the customer.

This product is not intended for continuous use, in order to extend the lifetime of laser
sources   please   make   a   10   minutes   break   per   hour   of   continuous   operation
(BLACKOUT OR ELECTRICAL STOP)

Summary of Contents for LS550-RGB3000







Reviews: